Filaments Depot PLA 1.75mm 1kg - Natural

Filaments Depot PLA 1.75mm 1kg - Natural

Made in Canada

Printing Temperature : 190°C - 230°C
Heated Bed: PLA can be printed with or without a heated print bed. However, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.
First layer usually 5°C-10°C higher than subsequent layers.
Sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.
Cooling Fan: Highly recommended.
Empty Spool Weight : 140 Grams 
Gross Weight :1140-1170 Grams 
Net Weight : 1KG 
Mechanical Properties
Tensile modulus ISO 527-1 3500 MPa
Tensile strength ISO 527-1 50 MPa
Elongation at break ISO 527-1 ≤ 5%
Charpy notched impact, 23°C ISO 179-1eA ≤ 5 kJ/m2
Heat deflection temp, amorphous2 ISO 75-1 60°C
Heat deflection temp, crystalline2 ISO 75-1 105°C